Get This Free Cheat Sheet Guaranteed To Help Your Next Mix

Tuesday, January 6, 2015

The Ins And Outs Of Road Cases

I recently received a few questions about road cases so I thought this is a good time to bring back something that I posted about few years ago. It's an excerpt from The Touring Musician's Handbook that provides a good look at the differences between popular road cases.

"For many musicians, buying road cases for their gear is sort of a right of passage. As soon as you stencil your name on the cases, it suddenly means that your stock as a musician has risen and you’ve made the jump to becoming your own brand.
While some players choose not to case up their gear in order to save money in the beginning of their touring career, they soon see the shortsightedness the first time a favorite instrument is damaged from a fall off of a ramp or loading dock. Road cases are not only worth it, but almost mandatory in that your gear always has to work, and the only way to assure that happens is to keep it protected from the frequent and many knocks of the road.
The ATA Standard
Although many cases may look similar, the sturdiest (and consequently most expensive) ones are what’s known as ATA cases. This is a design based on an airplane parts packaging specification (known as ATA 300 Category 1), developed by airline packaging engineers and certified by the Airline Transport Association. ATA 300 compliant cases are designed to withstand the rigors of being shipped a minimum of 100 times, and specifies that the case will have recessed handles that will not break during transit. The standard also details the level of quality of every piece of construction material that goes into the case, including locks, hinges, and fastening systems, and also states that all rivets and screws must be non-corrosive and all edges must be rounded and have certain level of construction quality. Because of this ATA standard, the typical road case has also come to be known by the name “flight case,” since it’s made principally to survive multiple flights.
Tip: If the road case is too heavy for a single person to carry it, it needs casters.
Types Of Road Cases
Road cases come in a lot of different styles and a lot of different materials. As a result, all road cases are not created equal. Some are great for keeping the weather off your gear, while others are built to withstand the constant battle of the road. Let’s take a look at the different types.
Fiber Cases - Fiber cases are the typical drum cases that most drummers have used some time during their life (see Figure 7.2). They’re made out of fiberglass reinforced polyester and are very strong and rugged. While they work great for the club musician or weekend warrior because they keep the scuffs and incidental scratches off of the instrument, they’re deficient for road work in several ways; there’s little or no shock mounting for the instrument, the case is closed with a nylon strap that can be cut or lost, and their irregular shape make them difficult to pack efficiently. This means they usually get tossed on the top of the evenly packed square cases in the truck where they bounce around a lot as a result. Guess what that does for the instrument? They’re also prone to caving should something very heavy be placed upon them.

Aluminum - Aluminum cases have a major advantage in being extremely light weight, and usually have a fair amount of shock absorption (see Figure 7.3) inside. That being said, they’re very easy to pierce, and should generally not be used for shipping purposes as a result. It’s possible to have an ATA standard aluminum case, but you have to use so much aluminum that you lose the weight advantage that aluminum has over other types of cases.

Carpet Cases - These are simple plywood cases with an outer fuzzy carpet material (see Figure 7.4). This type of construction once again offers little in the way of impact relief and protection. They’re heavy because the internal frame may be constructed of steel, and even though the carpet finish makes them very tough, there’s not much in the way of shock mounting. Carpet cases are great for things like cables and mic stands, but not for anything expensive that must be protected.

Molded Plastic - Some cases are made out of molded plastic (see Figure 7.5) which might be good for keeping the rain off an instrument but not much help under the repeated impacts of being loaded onto a truck. Their weakness frequently is in the latches, which can break or come loose over time, and you don’t see plastic cases in very large sizes. Once again, molded plastic cases may come in an odd enough shape that it won’t easily pack in the truck. There are ATA molded cases made, which are also mil spec for military electronic gear, but they’re really expensive and generally custom made.

Sandwiched Material - The strongest and most common road cases are the ones with sandwiched material and reinforced edges and corners (see Figure 7.6), and these can be made of different materials for different types of transit. Most sandwich-type road cases are constructed in three main layers:
  • an outer layer of a plastic-based laminate called ABS
  • a middle layer of 3/16 to ½ inch cabinet-grade plywood such as birch, poplar or maple
  • an internal shock-absorbing foam layer that corresponds to the exact shape of the instrument or piece of gear.
  • The edges of the case are reinforced with aluminum extrusion, and have steel or zinc corner pieces and recessed handles and fasteners. 
Protective Foam
There are generally two types of protective foam used in road cases. Polyurethane foam is very soft and provides a gentle cushion for any delicate item. It’s usually available in ½ inch to 10 inch thickness in ½ inch increments. The problem is that it’s so soft that it can be crushed by a heavy item, in which case a polyethylene foam is used instead. Polyethylene foam is very dense and not very flexible, and the texture is almost like plastic. Frequently it’s used under a heavy item where polyurethane would simply not last due to the constant compression. Usually you want at least a half-inch of foam between your instrument and the outer layer of the case, although most people prefer one inch for added protection.

One thing that’s mostly overlooked with road cases is that the internal foam layer can have some negative chemical interactions with the finish of your instrument that can cause it to become dull and discolored over time. Nitrocellulose lacquer (like those used on vintage guitars), varnish and shellac are much more susceptible to this than the modern polyurethane and polyester type finishes. The way to prevent any interaction from occurring is to make sure that your road cases have a cloth lining over the foam (see Figure 7.7). Some companies use a velvet-like material layer mostly for cosmetics, but it will also protect your instrument from any finish damage from the foam. If buying a custom case, a cloth covering only adds a small amount to the overall cost of the case.

Remember, if you buy good quality cases, they can last for your entire career on the road, so go for the best and don’t cheap out. 

Tip: When buying road cases, try to buy either cases already in stock at your local music store or pro audio dealer, or have them made locally. The cost of shipping them can sometimes be almost as much as the case itself. Almost every city now has a company that makes road cases, so finding one that’s local should be easy.
The good thing about ATA type road cases is that they can be repaired. Just about anything can be replaced and the case will come back as good as new. In fact, there are companies that specialize in repairing road cases like Mobil Flight Case Repair, although just about any road case manufacturer can do it."


1 comment:

Rand said...

Great and very educational article Bobby, thanks.

LinkWithin

Related Posts Plugin for WordPress, Blogger...