Get This Free Cheat Sheet Guaranteed To Help Your Next Mix

Sunday, June 24, 2012

A Description Of The Audio Frequency Bands

EQ Bandwidth Chart image from Bobby Owsinski's Big Picture production blog
I'm always surprised when I speak with some young engineers about how little they know about the frequency bands of human hearing. They have a general idea, but it's not precise enough to help them when it comes to EQing.

Here's an excerpt from The Mixing Engineer's Handbook and The Audio Mixing Bootcamp book that covers the bands pretty well. It's actually from an article in the venerable old Recording Engineer/Producer magazine by Leo di Gar Kulka from way back in 1972.

By the way, another way to look at the frequency bands is on the chart on the left (also from the books).

"The audio band can effectively be broken down into six distinct ranges, each one having an enormous impact on the total sound.

Sub-Bass - The very low bass between 16 and 60Hz which encompasses sounds which are often felt more than heard, such as thunder in the distance. These frequencies give the music a sense of power even if they occur infrequently. Too much emphasis on this range makes the music sound muddy.

Bass - The bass between 60 and 250Hz contains the fundamental notes of the rhythm section so EQing this range can change the musical balance, making it fat or thin. Too much boost in this range can make the music sound boomy.

Low Mids - The midrange between 250 and 2000Hz contains the low order harmonics of most musical instruments and can introduce a telephone like quality to the music if boosted too much. Boosting the 500 to 1000Hz octave makes the instruments sound horn like, while boosting the 1 to 2kHz octave makes them sound tinny. Excess output in this range can cause listening fatigue.

High Mids - The upper midrange between 2 and 4kHz can mask the important speech recognition sounds if boosted, introducing a lisping quality into a voice and making sounds formed with the lips such as ‘m”, “b,” and “v” indistinguishable. Too much boost in this range, especially at 3kHz, can also cause listening fatigue.  Dipping the 3kHz range on instrument backgrounds and slightly peaking 3kHz on vocals can make the vocals audible without having to decrease the instrumental level in mixes where the voice would otherwise seem buried.

Presence - The presence range between 4 and 6kHz is responsible for the clarity and definition of voices and instruments. Boosting this range can make the music seem closer to the listener. Reducing the 5kHz content of a mix makes the sound more distant and transparent.

Brilliance - The 6 to 16kHz range controls the brilliance and clarity of sounds. Too much emphasis in this range, however, can produce sibilance on the vocals."


----------------------------------

You should follow me on Twitter for daily news and updates on production and the music business.

Don't forget to check out my Music 3.0 blog for tips and tricks on navigating social media and the new music business.

3 comments:

Unknown said...

Great message for me, thanks a lot.
Herman Proav is one of the leading distributors of professional audio video equipment, bulk cable and audio visual products to the commercial av and broadcast industries.
Audio Products

Jef Knight said...

Gawd forbid they take this to the next step and mix "in key"... ;)

Cheers

Zach Kadro said...

Thank you Bobby! I like how you describe the effect of changing each frequency on the overall sound. Nice breakdown!

LinkWithin

Related Posts Plugin for WordPress, Blogger...